Adjusting setup items – Sony WX-GT90BT Manuel d'utilisation

Page 36

Advertising
background image

36

2

Rotate the control dial until “SW
DIREC” appears, then press it.

3

Rotate the control dial until “SW
MODE” appears, then press it.

4

Rotate the control dial to select “1,”
“2,” or “3,” then press it.

5

Press

(BACK) to return to the

previous display.

For details on the settings for the subwoofer
phase, position, low pass filter frequency
and the low pass filter slope, see page 37.

Adjusting setup items

1

Press

, rotate the control dial

until the desired category appears, then
press it.

2

Rotate the control dial until the desired
item appears, then press it.

3

Rotate the control dial to select the
setting, then press it.

*

The setting is complete.

4

Press

(BACK) to return to the

previous display.

* For CLOCK-ADJ and BTM settings, step 4 is

not necessary.

The following items can be set depending
on the source and setting:

GENERAL:

*1 When the unit is turned off.

*2 Does not appear in App Remote.

*3 When the tuner is selected.

*4 When the CD or USB is selected.

*5 When the SiriusXM Vehicle Tuner is

connected.

SOUND:

CLOCK-ADJ

(Clock Adjust) (page 7)

BEEP

Activates the beep sound: “ON,” “OFF.”

AUTO OFF

Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”

AUX-A

*

1

*

2

(AUX Audio)

Activates the AUX source display: “ON,”
“OFF” (page 38).

CT

(Clock Time)

Activates the CT function: “ON,” “OFF”
(page 12).

BTM

*

3

(page 11)

ZAPPIN

*

4

ZAP TIME

(Zappin Time)

Selects the playback time for the
ZAPPIN function.

– “Z.TIME-1 (about 6 seconds),”

“Z.TIME-2 (about 15 seconds),”
“Z.TIME-3 (about 30 seconds).”

ZAP BEEP

(Zappin Beep)

Applies a beep sound between track
passages: “ON,” “OFF.”

PARENTAL

*

5

Sets the parental lock to “ON” or “OFF,”
and edits the passcode (page 39).

EQ7 PRESET

(page 33)

EQ7 SETTING

(page 33)

POSITION

SET F/R POS

(Set Front/Rear Position)

(page 34)
ADJ POSITION

*

1

(Adjust Position)

(page 35)
SET SW POS

*

1

(Set Subwoofer Position)

(page 34)

BALANCE

Adjusts the sound balance: “RIGHT-15”
– “CENTER” – “LEFT-15.”

Advertising