Sony WX-GT90BT - Manuel (Page 23)

23
Connecting
Bluetooth devices
Bluetooth operations
The Bluetooth function allows for handsfree
calling and music streaming via this unit.
To use the Bluetooth function, the following
procedure is necessary.
 Pairing
When connecting Bluetooth devices for
the first time, mutual registration is
required. This is called “pairing.”
Registration is required only for the first
time, as this unit and the other devices
will recognize each other automatically
thereafter.
 Connection
To use the device after pairing is made,
start the connection. Sometimes pairing
allows for connection automatically.
 Handsfree calling/Music streaming
You can make/receive handsfree calls
and listen to music when the connection
is made.
If pairing is not possible, your device may
not be compatible with this unit. For details
on compatible devices, visit the support site
on the back cover.
Installing the microphone
To capture your voice during handsfree
calling, you need to install the microphone
(supplied).
For details on how to connect the
microphone, refer to the supplied
“Installation/Connections” guide.
Operating the Bluetooth
functions
1
Press
.
The call menu appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Press (BACK)*.
The source returns to the Bluetooth
phone.
* For PAIRING, REDIAL, VOICE DIAL, and BT
SIGNL settings, step 3 is not necessary.
The following items can be set:
*1 You can also select these items by pressing
 and rotating the control dial to
select “BT.”
*2 Depending on the cellular phone, this unit’s
ringtone may be output even if set to “2
(cellular phone).”
*3 Appears on the setup menu when the unit is
turned off.
PAIRING * 1 (page 24)
PHONEBOOK (page 27)
REDIAL (page 28)
RECENT CALL (page 27)
VOICE DIAL (page 28)
DIAL NUMBER (page 27)
RINGTONE * 1 * 2
Selects whether this unit or the
connected cellular phone outputs the
ringtone: “1 (this unit)”- “2 (cellular
phone).”
AUTO ANS * 1 (Auto Answer)
Sets this unit to answer an incoming call
automatically: “OFF”-“1 (about 3
seconds)”-“2 (about 10 seconds).”
BT SIGNL * 1 (Bluetooth Signal) (page 25, 26)
BT INIT * 3 (Bluetooth Initialize) (page 30)