Sony STR-DA5200ES - Manuel (Page 94)

94 GB
1
Press the input button.
You can also use INPUT SELECTOR on
the receiver.
2
Press RECEIVER.
3
Press INPUT MODE repeatedly
to select the audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
• AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections.
If there are no digital audio signals, analog
audio signals are selected.
• ANALOG
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When either HDMI input, XM Radio or USB is
selected, “------” appears on the display, and you
cannot select other modes. Select an input mode
other than the HDMI input and XM Radio, then set
the audio input mode.
• When “2ch Analog Direct” is being used
(page 111), or MULTI CH is selected input, audio
input is set to “ANALOG.” You cannot select other
modes.
Enjoying the sound/
images from other inputs
You can reassign video and/or audio signals to
another input.
Example) Connect the OPTICAL OUT jack of
the DVD player to the OPTICAL VIDEO 2 IN
jack of this receiver when you want to input
the only digital optical audio signals from the
DVD player.
Connect the component video jack of the DVD
player to the COMPONENT VIDEO DVD IN
jack of this receiver when you want to input
the video signals from the DVD player. Assign
video and/or audio signals to the DVD input
jack using “Input Assign” in the Input menu.
1
Choose “Input” from the
menus.
You can also use the input buttons.
2,4
3
1