Sony STR-DA5200ES - Manuel (Page 77)

77 GB
T
une
r O
p
eratio
ns
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 35).
Tip
The tuning scale for direct tuning is shown below.
• FM band
100 kHz
• AM band 10 kHz*
* The AM tuning scale can be changed (page 134).
1
Connect a TV monitor to this
receiver.
Refer to “3: Connecting the monitor for
displaying menus” (page 19).
2
Turn on the receiver and the TV.
3
Press RECEIVER to enable
receiver operation.
4
Press ON SCREEN.
The menu list of this receiver appears on
the TV screen. Press MENU if the menu
list does not appear on the TV screen.
5
Press V/v repeatedly to select
“FM” or “AM,” then press or
b.
6
Press V/v to select “Auto
Tuning,” then press .
7
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1 Press OPTIONS.
2 Press V/v to select “FM Mode,” then
press .
3 Press V/v to select “MONO,” then press
.
Tuner Operations
Automatic tuning
3
5-7
MENU
2
4