Sony KDL-32R420B - Manuel (Page 24)

24 US
D:\SONY TV\SY140048_Clover 29 (Rev-1)\4528762121_US\070MEN.fm masterpage: Left
KDL-48R470B / 40R470B / 32R420B
4-528-762-12(1)
Clock/Timers
Sets the timer and clock.
Sleep Timer: Set the time in minutes that
you would like the TV to remain on
before shutting off automatically.
On Timer: Turns on the TV from standby
mode at a time you set, and tuned to a
channel or input of your preference or
photo frame mode. Before setting this
function, make sure you set the correct
current Time.
Current Time: You can set the current time
and date. This feature also can be set
from initial setup.
Initial Setup
Starts the initial setup procedure. This option
allows you to retune the TV after moving
house, or to search for new channels that
have been launched by broadcasters.
Language
Select the language in which the menus are
displayed.
Startup Logo
Select On to display the logo when the TV is
turned on. Select Off to disable it.
LED Indicator
Select On to light up the LED indicator. Select
Off to disable it.
AV setup
Manage Inputs: Assigns name to external
equipment input.
Select Auto to display names when the
equipment is connected, or Always to
display regardless of connection status
or Off to disable input (only for TV).
Video/Component Input: Select Auto to
have the TV detect and switch between
the component video jack
or the
video jack when component video
jack or video jack is connected.
Note
• You cannot use the component video jack and
the video jack at the same time
Speakers: Select sound output from the TV
speakers or external audio equipment.
Headphone/Audio Out: Sets the sound
output to headphones, external audio
systems or Active Subwoofer connected
to the TV. Disconnect headphones from
the TV when you select Audio Out or
Subwoofer.
Headphone Speaker Link: Switches the
TV’s internal speakers on/off when you
connect headphones to the TV.
Headphone Volume: Adjusts the volume
of the headphones.
Note
• This option is not available, when Headphone/
Audio Out is set to Audio Out.
Audio Out:
Variable: When using an external audio
system, volume output from audio out can
be controlled using the TV’s remote.
Fixed: The audio output of the TV is fixed.
Use your audio receiver’s volume control to
adjust the volume (and other audio
settings) through your audio system.
Digital Audio Out: Sets the audio signal
that is output by connecting using
digital audio output (optical) cable or
HDMI (ARC) cable. Set to Auto, when
connecting equipment compatible with
Dolby Digital or DTS. Set to PCM, when
connecting equipment not compatible
with Dolby Digital or DTS.
TV Position: Improves the speaker settings
when set as Table-Top Stand or Wall
Mount according to your TV’s position.
BRAVIA Sync Settings
Allows the TV to communicate with
equipment that is compatible with the
BRAVIA Sync Control function, and connected
to the HDMI/MHL jacks of the TV. Note that
communication settings must also be made
on the connected equipment.
BRAVIA Sync Control: Sets whether or not
to link the operations of the TV and the
connected equipment that is compatible
with BRAVIA Sync Control. When set to
On, the following functions are
available.
If the specific Sony equipment that is
compatible with BRAVIA Sync Control is
connected, this setting is applied to the
connected equipment automatically.