Sony KDL-32R420B - Manuel (Page 10)

10 US
D:\SONY TV\SY140048_Clover 29 (Rev-1)\4528762121_US\040GES.fm masterpage: Left
KDL-48R470B / 40R470B / 32R420B
4-528-762-12(1)
2 Secure the TV to the stand.
Use the optional hardware listed below (not
supplied):
 M6 machine screw (screwed into the screw
hole of the TV).
 A screw or similar (attach it to the TV stand).
 Rope or chain (strong enough to support the
weight of the TV). Make sure that there is no
excess slack in the rope or chain.
The length of the M6 machine screw differs
depending on the rope or chain diameter. Please
refer to below illustration.
3 Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
Note
• Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the stand without securing the TV and
the stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
Screw
(not supplied)
Rope or
chain
(not
supplied)
Screw hole
of the TV M6 machine
screw
(not supplied)
8-12 mm
Screw M6
Rope or chain TV
Wall-mount
holes
Rope or chain
(not supplied)
Anchor bolts
(not
supplied)
Wall-anchor
(not supplied)