HP Photosmart Pro B8850 Printer - Manuel (Page 12)

c. If you extended or removed the main tray to load paper, push in the main tray extension to the end of the
paper by squeezing the release and pushing in the extension, and push the tray back into the printer until it
is fully seated. Be sure to adjust the length of the main tray and reseat the tray in the printer before
you adjust the paper-length and paper-width guides or the paper will jam.
4. Adjust the paper-width and paper-length guides so they rest gently against the edges of the paper.
5. Check that the paper is lying flat in the tray.
6. Replace the output tray. If you are printing on paper larger than 21.6 x 28 cm (8.5 x 11 inches), pull out the
output tray extension by holding the output tray with one hand and pulling out the extension with your other hand.
Flip up the paper catch.
1 Output tray extension
2 Paper catch
7. In the printer driver on your computer, select the paper type that matches the type of media you have loaded.
For more information on the printer driver, see Print from a software program .
Print from the main tray 9
Engl
is
h