1 program the travel, Adjustment, Program the travel – LiftMaster 8360 Premium Series DC Battery Backup Capable Chain Drive Manuel d'utilisation

Page 10

Advertising
background image

10

Program the Travel

1

Without a properly installed safety reversal system, persons (particularly small children) could be SERIOUSLY INJURED or KILLED by a
closing garage door.
• Incorrect adjustment of garage door travel limits will interfere with proper operation of safety reversal system.
• After ANY adjustments are made, the safety reversal system MUST be tested. Door MUST reverse on contact with 1-1/2" (3.8 cm)

high object (or 2x4 laid fl at) on fl oor.

1.1

Press and hold the Adjustment
Button until the UP Button begins
to fl ash and/or a beep is heard.

1.5

Once the door is in the desired
DOWN position press and release
the Adjustment Button. The garage
door opener lights will fl ash twice
and the UP Button will begin to
fl ash.

1.2

Press and hold the UP Button
until the door is in the desired UP
position.

NOTE: The UP and DOWN Buttons can be used
to move the door up and down as needed.

1.6

Press and release the UP Button.
When the door travels to the
programmed UP position, the
DOWN Button will begin to fl ash.

1.7

Press and release the DOWN
Button. The door will travel to the
programmed DOWN position.
Programming is complete.

1.4

Press and hold the DOWN Button
until the door is in the desired
DOWN position.

NOTE: The UP and DOWN Buttons can be used
to move the door up and down as needed.

* If the garage door opener lights are

fl ashing 5 times during the steps for
Program the Travel, the programming
has timed out. If the garage door opener
lights are fl ashing 10 times during the
steps for Program the Travel, the safety
reversing sensors are misaligned or
obstructed. When the sensors are aligned
and unobstructed, cycle the door through
a complete up and down cycle using the
remote control or the UP and DOWN
buttons. Programming is complete. If you
are unable to operate the door up and
down, repeat the steps for Programming
the Travel.

Adjustment

1.3

Once the door is in the desired
UP position press and release the
Adjustment Button. The garage
door opener lights will fl ash twice
and the DOWN Button will begin
to fl ash.

Advertising