Quick reference instructions – Amana ARG7302 Manuel d'utilisation

Page 29

Advertising
background image

29

Quick Reference Instructions

Read

Important Safety Instructions before using Quick

Reference Instructions. If there are unanswered questions,
see detailed sections of this manual.

Setting Electronic Clock
1.

Verify display is flashing.

2.

Press

HRS + or - pad to set hours and MINS + or -

pad to set minutes.

3.

Press

CLOCK pad to save time-of-day.

Turning Off/On Clock Display
Press

CLOCK pad until display is blank. Clock retains

time while not displayed. To turn on display, press

CLOCK

pad until time-of-day displays and is not flashing.

Setting Electronic Timer
1.

Press

TIMER pad.

2.

Press

HRS + or - pad to set hours and MINS + or -

pad to set minutes.

3.

Press

TIMER pad again to cancel.

Resetting and Canceling Timer
To reset time when remaining time is displayed, press the
HRS + or - pad to set hours and MINS + or - pad to set
minutes until new time displays.

To cancel timer when remaining time is displayed or
signal after time elapses, press

TIMER pad.

Automatic Oven Shut-off
As a safety feature, oven control automatically shuts off
oven after 12 hours of operation. This feature can be
turned on or off.

To allow oven to operate for more than 12 hours, confirm
temperature knob is in

OFF position. Then, press and

hold the

MINS + and - pads for approximately

4 seconds. Display will change from time-of-day and show
“OFF”.

To set oven to shut off after 12 hours, confirm temperature
knob is in the

OFF position. Then, press and hold the

MINS + and - pads for approximately 4 seconds. Display
will change from time-of-day and show “ON”.

Operating Surface Burners
1.

Push in and turn control knob counterclockwise to
LITE position.
• Burner should ignite within 4 seconds.

2.

After gas ignites, turn control to desired setting.

3.

Turn control knob to

OFF position when finished

cooking.

Baking
1.

Open oven door to confirm nothing is stored in oven
cavity and set racks to proper height.

2.

To preheat oven, turn oven temperature knob to
desired temperature.

3.

Place food in oven.

4.

After cooking time elapses, remove food and turn
oven temperature knob to

OFF.

Adjusting Factory Set Baking Temperature
1.

Turn oven temperature knob to

OFF.

2.

Press and hold

HRS + and HRS - pad for

approximately 5 seconds.

3.

Immediately, press either Press

HRS + or HRS - pad.

HRS + increases oven temperature by 5°F.

HRS - decreases oven temperature by 5°F.

Broiling
1.

Center food on broiling grid and pan, and place in
oven.
• Oven door should be closed.

2.

Turn oven temperature knob to

BROIL.

3.

After broiling, remove food and turn oven temperature
knob to

OFF.

Self-Cleaning
1.

Prepare oven for self-cleaning.

2.

With oven door closed, move oven door lever located
above oven door to right to lock oven door.

3.

Turn oven temperature knob to

CLEAN position.

Interrupt Self-Clean Cycle
1.

Turn oven temperature knob to

OFF position.

2.

When oven has cooled to a safe temperature,
LOCKED light flashes. Door can be unlocked and
opened.
• Do not force door lever open. If door lever is

forced, lock can be damaged.

After Self-cleaning Cycle
Turn oven temperature knob to

OFF position when

finished. After oven has cooled

LOCKED light flashes.

Door can be unlocked and opened.

Advertising