SINBO SDF 3818 - Manuel (Page 14)

- 13 - SDF 3818 INSTRUCTION MANUAL
JUICING
thoroughly.
-All components, with the exception of the electrical parts, may be cleaned
in warm soapy water. Dry thoroughly before use.
-Dishwasher cleaning is not recommended.
TIPS
-Always place the deep fryer on a stable surface and keep all flammable
materials away.
-Make sure that the deep fryer is not near or on a switched-on hot plate.
-Before you use the deep fryer it must be filled with the required amount of
oil or fat.
Never use the deep fryer without oil or fat because this could damage the
unit.
-Never move the deep fryer during use. The oil becames very hot and you can
get burned. Wait to move the deep fryer until the oil has cooled off.
-This deep fryer is protected with a thermal safety device, which switches the
machine off automatically if it overheats.
-Never immerse the electrical unit in water.
-Never leave the deep fryer unattended while in use. Always ensure the safety
of children if they are near the deep fryer.
-If the deep fryer and/or cord are damaged, they must be replaced by the
manufacturer or its service agent.
Do not try to repair the unit by yourself, neither to replace a damaged cord.
This requires special tools.
-Be sure not to damage the heating element. (Do not bend or dent.)
-The electrical component is equipped with a safety cut-off, which ensures
that the heating element can only function when the element is correctly
placed on the fryer.
-In the case of overheating, the thermal protective device will switch off the
fryer automatically. This device is a small dark-brown button found through
a hole either on the underside of the electrical component, or in the cord
storage compartment. It can be re-activated again by pushing the button with
a pointed object (e.g. a ball pen). Disconnect it from mains before re-activationg!