TurboChef Technologies TURBOCHEF 30 - Manuel (Page 23)

the speedcook oven the speedcook oven 13 the speedcook oven
adjusting the temperature
Like the cook times, preprogrammed temperatures have been calculated by a staff of professional chefs to
yield optimal results. The first time you cook an item, it is recommended to start with the preprogrammed
settings. However, once you develop a feel for the product’s outcome using the preprogrammed setting,
you may wish to alter a preprogrammed temperature for personalization of specific products and recipes.
Temperatures may be altered up to 25°F (14°C) in either direction. Be aware that preprogrammed
temperatures can vary significantly from traditional settings. To adjust the temperature:
1. select the preprogrammed cook setting for the item to be cooked. (see pages 4-6.)
2. select “adjust settings.”
3. select “oven temp.”
4. adjust the temperature.
5. press the inner Cookwheel knob in to confirm the new temperature.
note: If “Cook Another” is selected at the end of the cook cycle, the oven will use the exact same settings used for the previous cook cycle
– including any adjustments to the cook time and/or temperature.
Adjustments to the temperature of a preprogrammed cook setting or to a cook setting in Favorites are saved temporarily to Favorites
under “View Last Cooked (10)” (see page 7). The original preprogrammed or saved setting will not be altered. To permanently save your
adjustment(s), the item must be permanently saved or re-saved to Favorites (see page 15).
Use the inner CookWheel knob to scroll to and select “Adjust Settings.”
Use the inner CookWheel knob to scroll to “Oven Temp.” Press knob in to select.
For information on “Advanced. . .” see page 14.
Turn the inner CookWheel knob to adjust the temperature in 5ºF (2ºC) increments. The original
temperature cannot be altered more than 25ºF (14ºC) in either direction.
For information on “Advanced. . .” see page 14.
To begin preheating, scroll to and select “Begin Preheat.”