Rose electronic Crystal View - Manuel (Page 48)

APPENDIXES
CrystalView Installation and Operations Manual
42
Appendix F. Rack Mount Instructions
The optional rack mount kit includes the following items:
•
Two black anodized mounting brackets.
•
Four 6 x 32 x 3/8” flat head mounting screws.
•
Mounting instructions insert.
To rack mount your CrystalView, attach the two rack mounting brackets to your
unit with the short flange against the unit using the four screws provided. Secure
the mounting brackets to the rack using the appropriate size bolts, nuts and lock
washers. Using hardware other than that provided could cause damage to the
electronics and/or result in loss of mounting integrity. Do not over tighten the
screws used to mount the unit to the mounting brackets.
The following general guidelines should be observed when installing your unit
into a rack.
a). The CrystalView is designed to work in an ambient temperature of 0
ο
C to
45
ο
C (32
ο
F – 113
ο
F).
b). Do not block power supply vents or otherwise restrict airflow when rack-
mounting this unit.
c). Mechanical loading of the rack should be considered to prevent
instability and possible tipping over.
d). Tighten all connectors securely and provide adequate strain relief for all
cables.
e). Provide a grounded power source to all units. Pay special attention to
overall branch circuit load ratings before connecting equipment to this
source. Overloaded circuits are potential fire hazards and can cause
equipment failures or poor performance.