Rose electronic Crystal View - Manuel (Page 32)

OPERATING INSTRUCTIONS
CrystalView Installation and Operations Manual
26
Operating Instructions- All Units
Once the Remote and Local Units are connected and configured, the remote
KVM station’s Keyboard, monitor and Mouse will function as if it were directly
connected to the CPU. All applications, upgrades and PC configurations can be
performed normally. Whenever you reconnect a Keyboard or Mouse or if the
Keyboard or Mouse ever locks up, press the “Hot Key” and the Num Pad Up (á)
arrow key once to reinitialize them.
Operating Instructions – Dual Unit
KVM Switching
The CrystalView “Dual” version allows for an additional KVM station to be
connected to the Local Unit. The CPU can be operated from either the Remote
KVM station or the Local KVM station but not simultaneously. The Local Unit is
active during boot-up. To activate the remote KVM station, simply press any key
on the remote KVM stations Keyboard or move the Mouse. To activate the local
KVM station, press any key on the local KVM station’s Keyboard or move its
Mouse.
A lockout feature disables activity from a KVM station until the “In Use” KVM
stations Keyboard or Mouse has not been used for more than 2 seconds. After 2
seconds of inactivity, pressing any key on the “Not in Use” KVMs Keyboard or
moving the Mouse will activate that KVM station and lockout the other KVM
station.
The Scroll Lock key is the only key that has been re-defined to enter/exit the
private mode on the Dual mode. If you have an application that requires the use
of the Scroll Lock key, contact Rose technical support.