Rose electronic Crystal View - Manuel (Page 20)

MODELS/CABLES
CrystalView Installation and Operations Manual
14
CrystalView to Rose switch Cable
To connect a CrystalView Unit to a Rose switch such as a ServeView,
UltraMatrix or UltraView, use Rose cable part number
CAB-CX0606Cnnn. This cable is configured with a DB25M connector on one
end and a VGA connector, PS/2 Keyboard and PS/2 Mouse connector on the
other end. A HD15 gender changer (included) must be used on the Video
connector.
Local Unit to Remote Unit Cable
To connect the Local Unit to the Remote Unit, use up to 1,000 feet of standard
CAT-5 UTP/STP “solid core” cable terminated with RJ45 connectors. Connect
this cable into the “Twisted Pair Link” connector on the local and remote unit.
CrystalView has been tested with all major makes of CAT-5 cables, including
BICC-VERO

, Mohawk

and AT&T

.
CrystalView has also been tested on CAT-3 cable and on pairs within a 25-pair
UTP trunk cable.
Serial Cables
CrystalView models with the serial option are configured with (DCE) DB9 female
connector on the Local Unit and (DTE) DB9 male connector on the Remote Unit.
A standard DB9 Male-Female cable is used between the Local Unit and the
CPUs DB9 serial port.
Typical applications for the serial link are touchscreens, serial printers and
industrial controls. If a null-modem cable is required, it must be connected to the
remote units serial connector.
Audio Cables
CrystalView models with the audio option are configured with two 3.5mm stereo
jacks on both the Local and Remote Unit. Standard 3.5mm stereo audio cables
are used to connect between the Local Units “Line In” connector and a sound
card’s “Line Out” connector. The Remote Units “Line Out” connects to a pair of
computer speakers.
See Appendix C. Parts and Cables for a list of cable part numbers.