Getting started, Making settings using the setup navigator menu, Chapter 3 – Pioneer BDP-52FD Manuel d'utilisation

Page 24

Advertising
background image

03

24

En

Chapter 3

Getting Started

Making settings using

the Setup Navigator

menu

Be sure to perform these settings when using the player

in the following situations.

• When you use the player for the first time.
• After Initial Setup format.
• After updating the player’s software.

Caution

• Before turning on the power, check that the

connections between the player and other devices are

correct. Also, turn on the power of the devices

connected to the player before turning on the player’s

power.

• When using a Pioneer Flat Screen TV or front

projector compatible with the Control function, set

Control to On on the connected device before turning

on the player’s power.

Note

• When a Pioneer Flat Screen TV or front projector

compatible with the Control function is connected to

the player using an HDMI cable, the player is

automatically set to the optimum picture quality for

the connected device.

1

Turn on the TV’s power and switch the input.

See the TV’s operating instructions for the details of

operating the TV.

2

Turn on the player’s power.

Press  STANDBY/ON.
Check that the Setup Navigator menu is displayed.

If the Setup Navigator menu is not
displayed

Press

HOME MENU to display the Home

Menu, select Initial Setup

Setup Navigator

Start, then press ENTER.

3

Start Setup Navigator.

Press ENTER.

Setup Navigator starts.

4

Select the OSD language.

Use

/ to select, then press ENTER.

When a Pioneer Flat Screen TV that is compatible with

Control function is connected to this player’s HDMI OUT

terminal, language settings are imported from the

Pioneer Flat Screen TV’s language settings before Setup
Navigator

begins.

5

Select the appropriate output resolution for the

connected TV.
Use

/ to select, then press ENTER.

6

Select the appropriate aspect for the connected

TV.
Use

/ to select, then press ENTER.

7

Close the Setup Navigator menu.

Press ENTER.

Setup Navigator finishes and the setting is stored.

• Press

RETURN

to go back to the previous

screen.

BDP-52FD_UCXCNSM_IBD_EN.book 24 ページ 2011年8月19日 金曜日 午後12時23分

Advertising