Pioneer BDP-52FD - Manuel (Page 20)

02
20
En
Connecting video and
audio cables
Note
• Make the settings in the Setup Navigator menu
according to the type of cable connected (page 24).
• To output video signals from this player, connect
using a video cable (not including when connected
using an HDMI cable).
Connecting a TV using a
video/audio cable
Caution
• Connect the player’s video output directly to
your TV.
This player supports the analog copy protection
technology. Therefore, the picture may not be
displayed properly if this player is connected to a TV
via a DVD recorder/video deck or when playing the
player’s output material that is recorded by a DVD
recorder/video deck. Furthermore, the picture may
not be displayed properly due to the copy protection
when the player is connected to a TV with a built-in
video deck. For details, contact the manufacturer of
your TV.
Note
• Video signals are output with a resolution of 576/50i
or 480/60i when this player is connected using a video
cable.
• Depending on the output video resolution setting, the
picture may not be output.
Connecting an AV receiver or
amplifier using an optical
digital audio cable
Note
• To switch the video from the AV receiver or amplifier,
also connect the video output terminals.
TV
Player’s rear panel
Direction of
signal flow
Red
White
It is also possible to connect to
an AV receiver or amplifier.
Connect the audio signals using
an optical digital audio cable or
an audio cable (2 channels) (
on
the right column ).
To video/audio input terminals
Vi
deo
/au
di
o
ca
bl
e (in
clud
ed)
Yellow
Player’s rear panel
To audio input terminals
AV receiver or
amplifier Direction of signal flow
2-channel analog
audio can also be
connected. To optical digital
audio input terminal
Optical digital audio
cable (commercially
available)
Red
White
Video/audio cable
(included)
BDP-52FD_UCXCNSM_IBD_EN.book 20 ページ ２０１１年８月１９日 金曜日 午後１２時２３分