Lenovo 1044 - Manuel (Page 73)

6. Remove the protective cover from the microprocessor socket. To avoid damaging the pins in the
microprocessor socket, do not touch the pins while removing the cover.
Figure 52. Removing the microprocessor socket cover
7. Remove the new microprocessor from the protective cover that protects the gold contacts on the
bottom of the new microprocessor.
Figure 53. Removing the new microprocessor from the protective cover
8. Hold the new microprocessor by the edges and align the notches 1 on it with the tabs 2 in the
microprocessor socket. Then, install the microprocessor into the socket.
Chapter 5 . Installing, removing, or replacing hardware 63