Other available magnum 250l gun and, Accessories, Caution – Lincoln Electric WIRE-MATIC 255 SVM 119-A Manuel d'utilisation
Page 30: Magnum gun connection kit (optional k466-6), K672-1 spool gun adapter kit, Warning
The kit includes a spool gun adapter module assembly
with a single connecting plug, a rear gas inlet setting
with hose, a gun and cable holders and mounting
hardware with installation and operating instructions.
(L9696)
The spool gun module is intended for use with
Lincoln Electric® Magnum™ Spool Guns only. Use
with other units may cause damage to the equip-
ment. For Spool Gun operation, refer to the
instruction manual provided with the Magnum™
Spool Gun.
____________________________________
MAKING A WELD WITH THE SPOOL
GUN ADAPTER AND SPOOL GUN
(K672-1) INSTALLED
The toggle switch on the front of the spool gun adapter
box permits quick transfer between the use of the
Wire-Matic 255 with its feeder gun and the connected
spool gun for same polarity electrodes.
CAUTION
C-1
ACCESSORIES
C-1
* Included with the K578-1.
MAGNUM GUN CONNECTION KIT
(Optional K466-6)
Using the optional K466-6 Magnum Connection kit for
the Wire-Matic permits use of standard Magnum 200,
300 or 400 gun and cable assemblies.
K672-1 SPOOL GUN ADAPTER KIT
Remove all input power to the Wire-Matic 255
before proceeding.
____________________________________
The K672-1 Spool Gun Adapter Kit provides recessed
panel “up front" direct connection of the K487 Spool
Gun (with remote speed control), or the K469 Spool
Gun (requiring K518 Connection Adapter) with the SP-
255, SP255-I and Wire-Matic 255 wire feed welder
machines.
It also provides single switch transfer between the
machine's use with its feeder gun or the spool gun for
same polarity welding with different wire and gas
processes.
OPTIONS/ACCESSORIES
OTHER AVAILABLE MAGNUM 250L
GUN AND CABLE ASSEMBLY
The following GMAW gun and cable assemblies are
available for use with the WIRE-MATIC 255. Each is
rated 200 amps 60% duty cycle or 250 amps 35% duty
cycle. The gun and cable assemblies are equipped
with the integrated connector, twist-lock trigger con-
nector, and includes a liner, diffuser, and contact tips
for the wire sizes specified:
WIRE-MATIC 255
LENGTH
PART NO.
10' (3.0 m)
12' (3.6 m)
15’ (4.5 m)
10' (3.0 m)
12' (3.6 m)
15’ (4.5 m)
K533-1
K533-2*
K533-3
K533-4
K533-5
K533-6
.035-.045”
(0.9-1.2mm)
.025-.030”
(0.6-0.8mm)
WIRE SIZE
WARNING