Operation, Safety instructions, General description – Lincoln Electric WIRE-MATIC 255 SVM 119-A Manuel d'utilisation
Page 20: Warning, Caution
B-1
OPERATION
B-1
Read and understand this entire section before operat-
ing your WIRE-MATIC 255.
SAFETY INSTRUCTIONS
ELECTRIC SHOCK can kill.
When using a Wire-Matic 255 power source there
will be a small spark if the electrode contacts the
work or ground within several seconds after
releasing the trigger.
____________________________________
GENERAL DESCRIPTION
The WIRE-MATIC 255 is a complete semiautomatic
constant voltage DC arc welding machine built to meet
NEMA specifications. It combines a constant voltage
power source, a constant speed wire feeder, and a
microcomputer-based controller to form a reliable high-
performance welding system.
Simple controls, consisting of continuous full range cal-
ibrated voltage control and wire feed speed control,
provide versatility with ease of use.
WIRE-MATIC 255
WARNING
FUMES AND GASES
can be dangerous.
•
Keep your head out of fumes.
•
Use ventilation or exhaust to
remove fumes from breathing
zone.
ARC RAYS
can burn.
•
Wear eye, ear and body
protection.
WELDING, CUTTING and
GOUGING SPARKS
can cause fire or explosion
•
Keep flammable material away.
•
Do not weld, cut or gouge on
containers that have held
combustibles.
CAUTION
•
Do not touch electrically live
parts such as output terminals
or internal wiring.
•
Insulate yourself from the work
and ground.
•
Always wear dry insulating
gloves.
____________________________________
Only qualified personnel should operate this equip-
ment. Observe all safety information throughout this
manual.
____________________________________
____________________________________
____________________________________