English, 9 patent - design registra- tion, 10 service – Mountfield 4155H Manuel d'utilisation

Page 18: 11 purchase terms

Advertising
background image

18

ENGLISH

EN

3. Dismantle the filter assembly (26:B). The pre-

filter is placed over the air filter. Make sure that

no dirt gets into the carburettor. Clean the air fil-

ter housing.

4. Clean the paper filter by tapping it gently

against a flat surface. If the filter is very dirty,

replace it.

5. Clean the pre-filter. If the filter is very dirty, re-

place it.

6. Assemble in the reverse order.
Compressed air or petroleum-based solvents such

as kerosene may not be used for cleaning the paper

filter insert. This will damage the filter.

8.10 Spark plug

The spark plug(s) must be replaced every 200

hours of operation (=at every other basic service).
Before disconnecting the spark plug, clean around

its mounting.
Spark plug: Champion RC12YC or equivalent.
Electrode distance: 0.75 mm.

8.11 Air intake

See 19:T. The engine is air-cooled. A blocked

cooling system can damage the engine. Clean the

engine’s air intake after 50 hours of operation.

More meticulous cleaning of the cooling system is

carried out during each basic service.

8.12 Lubrication

All lubrication points in accordance with the table

below must be lubricated every 50 hours of opera-

tion as well as after every wash.

8.13 Fuse

In the event of electrical faults, check/replace the

fuse, 20 A. See 20:S.

9 PATENT - DESIGN REGISTRA-

TION

This machine or parts thereof is covered by the fol-

lowing patent and design registration:
SE9901091-0, SE9901730-3, SE9401745-6,

US595 7497, FR772384, DE69520215.4,

GB772384, SE0301072-5, SE04/000239 (PCT),

SE0401554-1, SE0501599-5.

10 SERVICE

Authorised service workshops carry out repairs

and guarantee service. They use original spare

parts.

Original spare parts are supplied by service

workshops and by Many dealers.

We recommend that the machine be handed in to

an authorised service workshop for service,

maintenance and checking of the safety devices

once a year.

11 PURCHASE TERMS

A full guarantee is issued against Manufacturing

and material defects. The user must carefully fol-

low the instructions given in the enclosed docu-

mentation.

Guarantee period

For consumer use: two years from purchase date.

For batteries: six months from the purchase date.

Exceptions

The guarantee does not cover damage due to:
- neglect of the user to acquaint himself with ac-

companying documentation

- carelessness
- incorrect and non-permitted use or assembly
- the use of non-genuine spare parts
- the use of accessories not supplied or approved

by GGP

Neither does the guarantee cover:
- wearing components such as blades, belts,

wheels and cables

- normal wear
- engine and transmission. These are covered by

the appropriate Manufacturer’s guarantees with

separate terms and conditions.

The purchaser is covered by each country’s

national laws. The rights to which the purchaser is

entitled with the support of these laws are not

restricted by this guarantee.

Object

Action

Figure

Centre point 4 grease nipples.

Use a grease gun filled with

universal grease. Pump until

the grease emerges.

28

Steering

chains

Brush the chains clean with

a wire brush.

Lubricate with universal

chain spray.

-

Tensioning

arms

Lubricate the bearing points

with an oil can when each

control is activated.

Ideally carried out by two

people.

29

Control

cables

Lubricate the cable ends

with an oil can when each

control is activated.

Must be carried out by two

people.

29

Advertising
Ce manuel est liée aux produits suivants: