Motorola CP125TM - Manuel (Page 23)

21
English
PROG
RAMM
ING
MODE
Alert Tone Volume
(BEEP-X) BEEP-OFF, BEEP-1,
BEEP-2,
BEEP-3 Selects the alert tone volume needed. Select
BEEP-OFF, if you require quiet operation, or
BEEP-3, if working in a noisy environment.
Prime Channel
Select
(PRM-XXX) PRM-OFF, PRM-001, ….,
PRM-XXX,
XXX denotes the highest channel
number supported by your model. The Prime Channel is the channel that you wish
to spend most of your time monitoring. The radio
will always switch back to the Prime Channel if it
is idle for more than the pre-programmed hang-
time in other channel.
Backlight Select
(LGT-XXXX) LGT-AUTO, LGT-TOGL Selecting LGT-TOGL makes the Backlight
button a toggle to control the ON/OFF status of
the LCD backlight. Selecting LGT-AUTO causes
the backlight to automatically extinguish, if there
is no keypress for more than 5 seconds. Pressing
the Backlight button prolongs illumination time.
Feature Range Remarks
05_Programming.fm Page 21 Monday, August 22, 2005 1:49 PM