Motorola CP125TM - Manuel (Page 19)

17
English
SCAN
SCAN
Your radio is equipped with the Scan feature,
allows you to monitor multiple channels and
receive calls that are transmitted on them.
• The Gindicator appears on the LDC
screen while in scan mode.
Two types of scan are supported:
• Normal Scan – searches all channels
sequentially in the radio’s scan list.
• Priority Scan – allocates 50% of the scan-
ning time to the Priority Channel (the first
channel in the designated scan list).
During scan, when activity is detected that
meets the unsquelch condition, the radio stops
scanning and switches to that channel; the
G indicator and the channel number are
displayed. When no activity is detected for a
pre-set time, the radio resumes scanning.
If your radio has switched to a non-priority
channel during Priority Scan, it still checks for
activity on the priority channel. If activity is
detected there, the radio switches to the
priority channel.
The radio transmits on the Prime Channel, if
the PTT button is pressed during scanning. If
the radio has stopped scanning, and has
changed to a particular channel, all transmit
and receive activity is performed on that
channel.
Ch. 2 Ch. 3
Ch. 4
Ch. 1
Home
Start
Normal Scan
Ch. 2 Ch. 1 Ch. 3
Ch. 1
Ch. 4
Ch. 1
Home
Start
Channel 1 Prioritized
04_Scan.fm Page 17 Monday, August 22, 2005 1:49 PM