Bluetooth, Pairing precision cooking, Using the cookt o p: bluetooth – Cafe 30 Inch Induction Cooktop Owner Manual Manuel d'utilisation

Page 11: Pairing / precision cooking

Advertising
background image

10

49-80835 Rev. 5

Bluetooth

®

Pairing

Precision Cooking

Pairing a Bluetooth

®

Device

Refer to the literature for the supported device to make
sure it is ready to be paired.

NOTE:

The Hestan Cue

®

Quick Guide can be found in the literature packet.

Hold the

Precision Cooking

pad for 3 seconds until

display reads “Add”. Tap

to initiate pairing mode

on the unit and will blink, then activate your device
to initiate the device’s pairing mode. Refer to the table
below for device specific instructions.

When stops blinking,
device has been added.
Repeat this step for each
additional device. Up to 5
devices will be stored in
memory. To exit Pairing,
touch

Precision Cooking

pad one time, or menu will
automatically exit after 60
seconds of no user input.

The Precision Cooking feature allows precise temperature control of certain cooking devices for improved results.

Initiating a Precision Cooking Mode

1. Touch the

Precision Cooking

pad.

2. Any burner available for Precision Cooking will flash.

This excludes any burner on in standard mode. If no
Precision Cooking devices are paired, no burners
will flash as available.

NOTE:

Only one burner may

run a Precision Cooking mode at a time. If another
precision mode is attempted, the burner in use for
Precision Cooking will flash.

3. The display will read “SEL”, instructing you to select a

burner to use.

4. Touch the

On/Off

pad for the desired burner, or press

Sync Burners

to use Precision Cooking across the

two left burners.

Removing Bluetooth

®

Devices

Hold the

Precision Cooking

pad for 3 seconds until

display reads “Add”. Tap

so that display shows “dEL”,

then tap

to delete all paired devices. The icon will

turn off when complete.

NOTE:

Your unit cannot delete

a single, or specific device. All of your paired device will
be deleted simultaneously. After all devices are cleared,
devices you wish to use must be paired again.

USING THE COOKT

O

P:

Bluetooth

®

Pairing / Precision Cooking

Supported Devices

How to Initiate Pairing

Hestan Cue

®

Cookware

Tap pan handle twice

Precision Probe

Press side button once

Advertising