Curtis SRCD1079BT-PL - Manuel (Page 4)

RADIO OPERATION
1.
Press the POWER/AL OFF button (or press the POWER button on the remote) to turn on the
unit.
2. Press the FUNC./CL.ADJ button (or press the FUNC button on the remote control) to select
the FM RADIO mode.
3. Press and hold the SKIP +/TUNE+ or SKIP−/TUNE− button on the unit for approx. 1 second,
it will start to search the next available radio station in the direction of the search. The search
operation simply finds stations with strong signals. Stations with weak signal can only be
tuned in manually.
4. Use the P-MODE/MONO button (or use the MONO button on the remote) to select stereo or
mono broadcasting.
5. Press VOL + or VOL− button to adjust the volume to the desired listening level.
SAVING RADIO STATIONS IN THE MEMORY
Note : If you use this unit in the first time, or after plug off the AC/DC adaptor from a wall outlet,
the unit memory number will be starting from P01.
1. Tune to the desired stations.
2. Press the PROG/MEM button (or press the MEM button on the remote control), the display
will show the next memory station number and flash continuously.
3. Press the SKIP +/TUNE+ or SKIP−/TUNE− button on the unit to select memory number (you
can also use the M + or M− on the remote control), then press PROG/MEM button on the unit
or the MEM button on the remote control again to store the station into the memory.
4. Repeat step 1 to 3 to store more radio stations in the memory.
5. Up to maximum 20 radio stations can be stored in the memory.
TO SELECT A STORED RADIO STATION IN THE MEMORY
Use the MEM
+/AL2 or MEM−/AL1 button on the unit or the M+ or M− button on the remote
control to select the stored radio station.
Press the MEM
+/AL2 button on the unit or the M+ button on the remote control to skip up to the
next stored station in the memory.
Press the MEM
−/AL1 button on the unit or the M− button on the remote control to go back to the
previous stored station in the memory.
CD OPERATION
1.
Press the POWER/AL OFF button to turn on the unit.
2. Press the FUNC/CL.ADJ button to select the CD mode.
3. Insert a CD disc in the CD compartment and close the CD door, the unit will start reading the
disc, it will play the first track of the entire disc after reading.
4. Press VOL + or VOL− button to adjust the volume to the desired listening level.
5. During playing, press the PLAY/PAUSE button to temporarily pause playing. To resume,
press the PLAY/PAUSE button again.
6. To stop playing, press the STOP button.
- EN 6 -
Skip Mode
1.
During play or pause mode, press the SKIP +/TUNE+ button to go to the next track.
2. During play, press the SKIP −/TUNE− button on the unit once to go back to the beginning of the
track. Press the SKIP −/TUNE− button twice to go back to the previous track.
3. In pause mode, press the SKIP −/TUNE− button to go back to the previous track.
Search Mode
1.
Press and hold the SKIP +/TUNE+ or SKIP−/TUNE− button on the unit to quickly advance or
reverse through the track at high speed.
2. Release the button to return to normal play.
Different Play Mode
Press the P-MODE/MONO button to select different kinds of play mode with the following sequence.
(You can also use the REPAT button on the remote for the REPEAT function or use the RANDOM button
on the remote for the RANDOM function)
REPEAT ONE
¨ REPEAT ALL ¨ RANDOM ¨ NORMAL
REPEAT - the track being played and will repeat continuously.
REPEAT ALL - the whole disc will repeat continuously.
RANDOM – the tracks in the disc will be played in random sequence.
Programming
The programming should be done during STOP mode
1.
Press the PROG/MEM button on the unit or the PROG button on the remote control, the LCD
display will show P01 PROG flash continuously.
2. Use the SKIP +/TUNE+ or SKIP−/TUNE− button to select the desired track.
3. Press the PROG/MEM button on the unit or the PROG button on the remote control again to store
the selected track in the memory, the LCD display will show P02 PROG and flash continuously.
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the
memory.
5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.
6. To stop playing, press the STOP button.
7. To cancel the programming list, press the STOP button and open the CD compartment door or
select a different function RADIO or AUX.
AUX-IN CONNECTION
1.
Press the POWER/AL OFF button to turn on the unit.
2. Press the FUNC./CL.ADJ button to select the Aux mode.
3. Insert one side of the audio cable (not included) into the Line-Out or Phone Jack on your MP3
Player or audio device and the other side into the AUX-IN jack of the unit.
4. Turn on your MP3 player or audio device and follow its playback instructions.
- EN 7 -