Curtis RLC4009 - Manuel (Page 27)

24
Simple Troubleshooting
SYMPTOM Possible cause REMEDY
GENERAL
Dead. No LED Lit No power to the TV. Check all connections to the
TV including the AC jack,
Mains lead and Mains socket.
Dead Led lit red Set still in standby. Press either the Power button
or the Standby button on the
Remote control.
No signal. Blue screen.
Press SOURCE button to select
correct source.
Noisy, snowy,
ghosting picture (TV)
If using an indoor aerial, try
moving the aerial. Check
aerial connections.
Sound "Mute". Turn sound "Mute" OFF.
Volume set too low. Check volume settings.
No sound
External leads not
connected "if used". Check all external leads are
connected.
Technical Specifications
TV
TV System NTSC
Screen size 40” (diagonal)
Resolution 1920x1080 pixels (RGB)
Aerial input 75Ω (Unbalanced)
Audio output power 2x8 W
Power Consumption 220W
If the display fails or the performance dramatically, check the Display in accordance with the
following instructions. Remember to check the peripherals topinpoint the source of the failure.
If the Display still fails to perform as expected, contact the dealer for assistance.
Incorrect source selected.
Poor aerial Signal