Denon DRA-295 - Manuel (Page 12)

12
ENGLISH
7 OPERATIONS
Before operating
Preparations:
• Check that all connections are proper.
• Plug the unit's power cord into a wall outlet.
1 Turn on the power.
Press the power operation switch (button).
ON / STANDBY
OFF ON POWER
• ON/STANDBY
When the button is pressed, the power turns on and the
display lights.
When pressed again, the power turns off, the standby mode
is set and the display turns off.
Several seconds are required from the time the power
operation switch is set to the “ON” position until sound is
output. This is due to the built-in muting circuit that prevents
noise when the power operation switch is turned on and off.
B
OFF ON POWER
DISC SKIP RANDOM
CD
REPEAT
A / B REC
TAPE
VIDEO SELECT MUTING
STATUS
DIMMER
CDR / TAPE
PRESET
SHIFT
TUNER
A
SPEAKER
B
MASTER VOL
V. AUX
CD VCR DVD / VDP
REMOTE CONTROL UNIT RC-895
8 9
1
1
•
ª
•
ª
0 7 6
2 3
3 2 4
B
1 1 1 2
1
2
2 Select the front speakers.
Press the SPEAKER A or B button turn the speaker on.
SPEAKER
A B
A
SPEAKER
B
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
Playing the input source
B
1 3 3
1 Press the button for the program source to be played.
EX: CD
2 Start playback on the selected component.
For operating instructions, refer to the various components’
manuals.
3 Adjust the volume.
CD
CD
MASTER VOL
•
ª
A / B REC
TAPE
VIDEO SELECT MUTING
STATUS
DIMMER
CDR / TAPE
PRESET
SHIFT
TUNER
A
SPEAKER
B
MASTER VOL
V. AUX
CD VCR DVD / VDP
REMOTE CONTROL UNIT RC-895
1
•
ª
•
ª
0 7 6
3 2 4
B
1
3
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
The volume level is
displayed on the master
volume level display.
The volume can be adjusted within the range of –60 to 0 to
18 dB, in steps of 1 dB. However, when the channel level is
set as described on page 13, if the volume for any channel
is set at +1 dB or greater, the volume cannot be adjusted up
to 18 dB. (In this case the maximum volume adjustment
range is “18 dB — (Maximum value of channel level)”.)
MASTER VOLUME