Maytag MVWB850YG - Manuel (Page 9)

9
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efficiency detergents. The package
will be marked “HE” or “High Efficiency.” Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
HELPFUL TIP: See “Washer Maintenance” for information on
recommended method of cleaning washer dispensers.
4.
Add HE detergent to dispenser
6.
Add liquid fabric softener
to dispenser
Pour a measured amount of liquid
fabric softener into dispenser; always
follow manufacturer’s directions for correct amount of
fabric softener based on your load size. Then select
Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overfill or dilute. Overfilling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls
in this washer. They will not dispense correctly.
7.
Press POWER/CANCEL to turn on
washer
Detergent dispenser
Fabric softener dispenser
5.
Add liquid chlorine bleach
to dispenser
Do not overfill, dilute, or use more than 3/4 cup (180 mL). For
maximum soil and stain removal, you may use the liquid chlorine
bleach dispenser for liquid chlorine bleach or color-safe bleach.
Liquid chlorine
bleach dispenser
NOTE: Do not add single-dose laundry packets, Oxi-type
boosters, or fabric softener crystals to dispensers. They will not
dispense correctly.