Maytag MVWX600BW - Manuel (Page 9)

9
9.
Select wash temperature
Once you select a cycle, select the desire wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your garments.
10.
Select cycle options, if desired
If you would like to add an Extra Rinse, Fabric Softener
and/or Oxi option, turn the knob for that feature.
11.
Press START/Pause/Unlock
to begin wash cycle
Press the START/Pause/Unlock button to start the wash cycle.
When the cycle has finished, the DONE indicator will light.
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press START/
Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.
8.
Select SOIL LEVEL
Once you select a cycle, select the desire soil level by turning
the Soil Level knob to the desired setting.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to
save energy. This will be cooler
than your hot water heater
setting.
Whites and pastels
Durable garments
Heavy soils
Warm
Some cold water will be added,
so this will be cooler than what
your previous washer provided.
Bright colors
Moderate to light soils
Cool
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Colors that bleed or fade
Light soils
Cold
Warm water may be added
to assist in soil removal and
to help dissolve detergents.
Dark colors that bleed or fade
Light soils
Tap Cold
This is the temperature from
your faucet.
Dark colors that bleed or fade
Light soils