Maytag MVWX600BW - Manuel (Page 3)

3
For best performance, it is recommended to load garments in loose
heaps evenly around the washplate.
As the washer dampens and moves the load, the level of the
garments will settle in the basket. This is normal, and does not
indicate that more garments should be added.
IMPORTANT: You will not see a washer basket full of water as with
your past agitator-style washer. It is normal for some of the load to
be above the water line.
WHAT’S NEW UNDER THE LID?
Use only High Efficiency (HE) detergent.
Concentrated Cleaning
Low-water cleaning means concentrated cleaning. Rather than
diluting detergent as done in an agitator-style washer, this washer
delivers the detergent directly to the soils.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds and
noises that are different from those of your previous washer. For
example, you may hear a clicking and hum at the beginning of the
cycle, as the lid lock goes through a self-test. There will be different
kinds of humming and whirring sounds as the washplate moves
the load. And sometimes, you may hear nothing at all, as the
washer determines the correct water level for your load or
allows time for clothes to soak.
Cleaning with Less Water
The most striking difference in your new washer is the low-water
washplate wash system. The washer automatically adjusts the
water level to the load size—no water level selector is needed.
Traditional agitator-style
washer
Washer with low-water
washplate wash system
Washplate
Automatic Load Size Sensing
Once you start the cycle, the lid will lock, and the washer will
begin the sensing process to determine the correct water level
for the load. This may take several minutes before water is added.
You will find a step-by-step description in the “Cycle Status Lights”
section.
You will hear the motor turn the basket in short pulses to thoroughly
wet the load. This low-water wash method uses less water and
energy compared to a traditional agitator-style washer.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be
marked “HE” or “High Efficiency.” Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using regular
detergent will likely result in longer cycle times and reduced
rinsing performance. It may also result in component failures and
noticeable mold or mildew. HE detergents are made to produce
the right amount of suds for the best performance. Follow the
manufacturer’s instructions to determine the amount of detergent
to use.
Washplate