Maytag MVWB880BW - Manuel (Page 16)

16
If you experience Possible Causes Solution
Washer not performing as expected (cont.)
Not cleaning or removing
stains (cont.)
Not using HE detergent or using too
much HE detergent. (cont.)
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow detergent directions based
on load size and soil level.
Not using correct cycle for fabric type. Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
If using Rapid Wash cycle, wash only a few items.
Use Power Wash, Whites, or Heavy Duty cycle for tough
cleaning.
See the “Cycle Guide” to match your load with the best cycle.
Not using dispensers. Use dispensers to avoid chlorine bleach and fabric softener staining.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not add products directly onto load.
Not washing like colors together. Wash like colors together and remove promptly after the cycle
is complete to avoid dye transfer.
Odors Clean washer maintenance not done
as recommended.
Run the Clean Washer with affresh ® cycle after every 30 washes.
See “Washer Care” in “Washer Maintenance.”
Unload washer as soon as cycle is complete.
Not using HE detergent or using too
much HE detergent.
Use only HE detergent. Be sure to measure correctly.
Always follow the detergent directions.
See “Washer Care” section.
Fabric Damage Sharp items were in pockets during
wash cycle.
Empty pockets, zip zippers, and snap or hook fasteners before
washing to avoid snags and tears.
Strings and straps could have tangled. Tie all strings and straps before starting wash load.
Items may have been damaged before
washing.
Mend rips and broken threads in seams before washing.
Fabric damage can occur if the load is
tightly packed.
Load garments in loose heaps evenly around the washplate.
Do not load garments directly over the center of the washplate.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 additional garments after washer has started.
Garment care instructions may not
have been followed.
Always read and follow garment manufacturer’s care label
instructions. See the “Cycle Guide” to match your load with
the best cycle.
Liquid chlorine bleach may have been
added incorrectly.
Do not pour liquid chlorine bleach directly onto load. Wipe up
bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Do not place load items on top of bleach dispenser when
loading and unloading washer.
Incorrect dispenser
operation
Clogged dispensers or laundry
products dispensing too soon.
Do not overfill dispenser. Overfilling causes immediate
dispensing.
Always select FABRIC SOFTENER option to ensure proper
dispensing.
Load dispensers before starting a cycle.
It is normal for small amounts of water to be remain in dispenser
at the end of the cycle.
Homes with low water pressure may result in residual powder in the
dispenser. To avoid, select a warmer wash temperature if possible,
depending on your load.
TROUBLESHOOTING
First try the solutions suggested here or visit our website to possibly avoid the cost of a service call.
In U.S.A. www.maytag.com/product_help – In Canada www.maytag.ca.