Maytag MVWB880BW - Manuel (Page 10)

10
Turn cycle knob to choose your
wash cycle. Estimated Time
Remaining will light up with a
cycle time. You may notice time
adjusting during the cycle. This is
normal.
8.
Select cycle
9.
Select cycle modifiers
Once you select a cycle, the default settings for that cycle will
be lit. Press the Modifier buttons to change the Wash Temp,
Spin Speed, and Soil Level, if desired. Not all settings are
available with all cycles.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
11.
Press START/PAUSE to begin
wash cycle
Press the START/PAUSE button to start the wash cycle. When
the cycle has finished, the end of cycle signal will sound (if set).
Promptly remove garments when cycle is done to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and snaps.
If lid is left open for more than 10 minutes, the water will
pump out.
10.
Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off,
if desired.
NOTE: Not all options are available with all cycles.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to save
energy. This may be cooler than your
hot water heater setting.
Whites and pastels
Durable garments
Heavy soils
Warm
Some cold water will be added, so
this may be cooler than what your
previous washer provided.
Bright colors
Moderate to light soils
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents
Colors that bleed or fade
Light soils
Cold
Warm water may be added to assist
in soil removal and to help dissolve
detergents
Dark colors that
bleed or fade
Light soils