Denon AVR-682 - Manuel (Page 47)

47
ENGLISH
20 SPECIFICATIONS
2 Audio section
•
Power amplifier
Rated output:
Front: 70 W + 70 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
100 W + 100 W (6 Ω /ohms, 1 kHz with 0.7% T.H.D.)
Center: 70 W (8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
100 W (6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Surround: 70 W + 70 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
100 W + 100 W (6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Output terminals: Front: A or B 1 6 to 16 Ω /ohms
A + B 12 to 16
Ω
/ohms
Center/Surround: 1 6 to 16 Ω /ohms
• Analog
LINE input - SPEAKER OUT
Input sensitivity / input impedance: 200 mV / 47 k Ω /kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)
S/N ratio: 98 dB (IHF-A weighted) (TONE DEFEAT ON)
2 Video section
•
Standard video jacks
Input / output level and impedance:
1 Vp-p, 75
Ω
/ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
• S-video jacks
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
C (color) signal — 0.286 Vp-p, 75 Ω /ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
2 Tuner section
[FM] (note: µV at 75 Ω /ohms, 0 dBf = 1 x 10 – 15 W) [AM]
Receiving range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz
Usable sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB quieting sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N ratio: MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
Total harmonic distortion: MONO 0.15% (1kHz)
STEREO 0.3% (1kHz)
2 General
Power supply: AC 120 V, 60 Hz
Power consumption: 3.7 A
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm (17-3/32” x 5-25/32” x 16-7/16”)
Weight: 9.8 kg (21 lbs 9.7 oz)
2 Remote control unit (RC-896)
Batteries: R6P/AA Type (two batteries)
External dimensions: 54 (W) x 172.5 (H) x 29 (D) mm (2-1/8” x 6-25/32” x 1-9/64”)
Weight: 120 g (Approx. 4.2 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.