Sioux Tools NO. 1 SERIES “1AM” - Manuel (Page 2)

2
GENERAL OPERATION
Start the tool by depressing the lever.
On reversing tools, the direction of spindle rotation is controlled by the reversing button. When the button is depressed, the
spindle rotates counterclockwise. Always depress the button fully to obtain full power. The reversing button can be locked in
the reverse direction by fully depressing and rotating the button clockwise.
ADJUSTABLE CLUTCH OPERATION
Adjustable clutch tools will continue to ratchet when the preset torque is reached.
Adjustable clutches are adjusted externally with the Sioux No. 2366 clutch adjustment wrench or a #1 (3/16", 4.8mm Dia. shank) Phillips
screwdriver. To adjust the clutch, rotate the clutch cover until the slot in the clutch case appears. Turn the output spindle of the tool with a
1/4 (6.4mm) hex key wrench until the groove in the adjusting washer is aligned with the slot in the clutch case. Insert the clutch adjustment
wrench into the groove and push to fully engage the teeth. Turn the clutch adjustment wrench counterclockwise to increase the torque.
Three clutch springs are available and are color coded for torque range.
#66050 green spring 2-20 in-lb (.23-2.26 N . m)
#66049 blue spring 15-35 in-lb (1.7-4 N . m)
#66048 silver spring 30-50 in-lb (3.39-5.6 N . m)
DRILLS
When changing bits, lock the spindle by depressing the spindle lock button.
DECLARATION OF CONFORMITY
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
1AMX1201, 1AMX1206, 1AMX2106, 1AM1102, 1AM1106, 1AM1111, 1AM1112, 1AM1206, 1AM1211, 1AM1311, 1AM1402, 1AM1411,
1AM1412, 1AM1413, 1AM1511, 1AM1512, 1AM1513, 1AM1611, 1AM1711, 1AM1712, 1AM1713, 1AM2101, 1AM2105, 1AM2106,
1AM22O1, 1AM2202, 1AM2205, 1AM2206, 1AM2301, 1AM2302, 1AM2305, 1AM2306, 1AM2401, 1AM2402, 1AM2405, 1AM2406
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
June 1, 2003
Murphy, North Carolina, USA
Date and place of issues
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer Signature of issuer