Paradigm Millenia LP XL - Manuel (Page 5)

6
up to
OR
PLACEMENT
(continued)
OR
Fig. 4
Fig. 2
Fig. 3
Fig. 1
7
WALL-MOUNTING
Bracket is slotted (see illustration), to allow further adjustment if necessary. Re-check to ensure
bracket is level. Mark outer screw holes.
WARNING! For stability all screws MUST be used
Position bracket and ensure it is level. Mark the two center screw holes. Drill pilot holes, then press
anchor bolts firmly into drywall and screw in. Follow with flathead screws: DO NOT SCREW ALL THE
WAY IN AT THIS POINT—leave screw heads protruding slightly.
MOUNTING LEFT/RIGHT SPEAKERS
Wall screws
not supplied Wall screws
not supplied
Position bracket
vertically on wall
as shown, then
follow the steps for
horizontal installation
that follow as a guide
to installing your
L/R speakers. NOTE: This step is for positioning only.
Screws will be removed in next step to
allow installation of additional anchor
bolts (not supplied).
MOUNTING CENTER SPEAKER
3.258”
3.258”
If you are not comfortable performing the following instllation procedure, have a professional
perform the installation (see your dealer about hiring a professional).
IMPORTANT! Installation instructions
are for ALL MODELS. If you own
the Millenia LP XL there will be
an additional screw and hole
(see diagram at right).
Step 2
Step 1 Step 1