Soundmatters FOXLV2 SERIES - Manuel (Page 7)

12 13
Built-in Microphone
(microphone-equipped models)
On the front of foxL is a wide bandwidth,
high sensitivity microphone with dedicated
noise-canceling electronics which provide
enhanced voice clarity.
Optional Subwoofer
Add a good-quality, powered hi-fi
subwoofer, like soundmatters’ SUBstage,
to a pocket-sized speaker? May seem
crazy – but with foxL the results are
amazing. Perfect to create a full-range
personal listening system for your home
workstation.
Microphone
(behind grille)
External Subwoofer
connects using 3.5mm
stereo mini-jack
If your sub connects with an RCA,
typically use RIGHT/Red input only
(refer to sub manual), and use an
RCA to 3.5mm adaptor to connect
to foxL
foxL automatically over-rides streaming
music, becoming both mic and speaker
when a call is answered by your bluetooth-
connected phone or computer.
Troubleshooting
1. Hearing distortion?
• Lower volume
• Low Battery > connect to wall power
• Power Off, then On
2. Not enough output with foxL volume
all the way up?
• Turn up volume on music player
• Move closer to foxL, or to a quieter
listening area.
3. Unable to pair with Bluetooth
Music Player? (Bluetooth-equipped models)
• Confirm device is Stereo Bluetooth 2.0 A2DP
compatible.
4. Experiencing signal loss or dropouts
via Bluetooth? (Bluetooth-equipped models)
• Occasional signal dropouts are normal
for Bluetooth
• Move closer to Music Player
• Confirm device is A2DP compatible
Specifications
Battery life: up to 5 hours
Power: 4W x 2 <0.1%THD, 5V in
2W x 2 <0.1%THD, 3.6V in
Output Level: 97dB @ 0.5m, 5V
95dB @ 0.5m, 3.6V
Frequency
Response: 80Hz–20kHz (DIN 4500)
AC Adapter: 5V 2A Max 15W (supplied)
Dimensions: 143 x 55 x 35 mm
5.6 x 2.2 x 1.4 inch
Weight: 269 gram (9.5 oz.)
Soundmatters believes in a policy of continuous
improvement, therefore specifications are subject to
change without notice.
English English