Battery charging & power use, Bluetooth operation – Soundmatters FOXLV2 SERIES Manuel d'utilisation

Page 6

Advertising
background image

10

11

Battery Charging & Power Use

USB Input for Charge/Power
• During non-use, USB recharging takes

about 4 hours, depending upon current

available at USB port.

• USB charges to 95% of full capacity,

and LED may stay red

Power notes:
• A fully charged battery will play for about

5 hours, depending upon volume levels.

• During the last 10% of a charge, output

volume will be reduced.

• Power output is doubled when it is

connected to wall AC, enabling it to play

louder than with battery power.

foxL has the versatility of two power options (V2), internal re-chargeable battery or externally

charging via AC adapter or USB
For INITIAL CHARGING, use wall-socket AC and the foxL power supply. Allow about 4 hours

(until LED goes green). Subsequent rechargings using AC will require only about 1 hour.

5V Power Supply Input

(connect to 5 V power supply
to wall AC and foxL)

LED Charge Indicator

RED = charging;
GREEN = 100% charge;
BLINKING RED = using more

power than incoming

If given an option in the transmitter setup,

select “headphone,” NOT “headset.”
Call Functions
• Answer Incoming Call - Push Bluetooth

button < 1.5 seconds

• End Active Call – Push Bluetooth button

< 1.5 seconds

• Reject Incoming Call – Push/hold button

> 1.5 seconds

• Manually Turn-off Bluetooth Circuitry –

Push/hold button for 5 seconds
Visit www.soundmatters.com for more info.

BEFORE you begin be sure your phone (or other
A2DP Bluetooth device) is able to play/stream

music.
1) Switch foxL ON , front LED button shows

amber, then flashes green while searching
2) Bluetooth will auto-search for the last five

previously paired units (for up to 30 seconds).
3) Once paired, the front LED button will

continue to flash green.
4)If Bluetooth can’t discover prior paired units, it

will search for new units to pair with.
5) If Bluetooth can’t pair successful (about 2 and

half minutes), it will auto turn off.
Follow your device’s instructions for Bluetooth

Pairing. (Each is different!) Initial pairing code is

0000.
Some take just seconds to pair, and some are less

friendly and can take longer.

Bluetooth Operation

(Bluetooth-equipped models)

English

English

Bluetooth Button

(Bluetooth-equipped models)

Advertising