Kenmore 461.99609 - Manuel (Page 8)

To start liiB WI jis Cooler and achieve maximum
cooling quickly;
• Turn the temperature control knob ciockwlse
to the furthest 'Max' (maximum) setting on
the wider blue section of the graduated
control dial.
• Allow the unit to run at this setting for 3-4
hours,
• When maximum cooilng is achieved, turn
back the temperature control knob setting to
the 10 o'clock position on the graduated blue
control dial. See flg.B
- To turn off the Wine Cooler, (no cooling)
rotate the control knob to the “0* (off)
position See fig A
Turn the control to the "O” (off) position to tem­
porarily disconnect the cooiing cycle When the
Wine Cooler Is not to be used for a long period of
time, disconnect the plug and leave the door par­
tially open
Defrosting:
Your Wine Cooler is designed with an "Auto­
Cycle" defrost system. Whai is Auto Cycle
defrost?
The refrigerated surfaces defrost automatically
during the "off" cycle of the coid control, (thermo­
stat) Defrost water Is disposed of automaticatly,
by means of being channeled onto a drip tray
located on the compressor. Heat transfer from
the compressor causes the defrost water to
evaporate,
Fig. B
Moving &
Vacations
lltilPOflTANT!
If you move, remove or
securely fasten down all
loose Items inside the Wine
Cooler. To avoid damaging
the leveling screws, turn
them ail the way Into the
base
Vacation Time
For short vacation periods,
leave the control knobs at
their usual settings. During
longer absences;
1, Remove all bottles,
2. Disconnect from
electrical outlet.
3. Clean the Wine
Cooler thoroughly
4, Leave the door open
to avoid formations of
condensate, mold or
odors,