Kenmore 461.99609 - Manuel (Page 7)

DOOR REVERSAL
IMPORTANT!
REQUIRES: Phlips §2 Screwdrlvar,
Unplug Ihs unit from ttis eiectrica! outist {If
connsErted) and lajr it on Its back.
RemovB fia staaws fttxn the Losirer Hinge
Assembly.
Puil the door downward to remove it from the
cabinet of the Wine Cooler,
Remove the upper hinge pin from the top
right side of the cabinet and reinstall It on the
top left side.
Remove the plastic cap from the right side of
the door frame and relnstail it on the (eft side
of the door frame (the previous pin location).
8. Carefudjf reposition the door on the cabinet
and push up until the top hinge pto is
inserted into the top of the door.
7. While the door remains closed install the
iower hinge assembly.
a. Close the door md return the unit to its
upright position (wait 80 minutes before re­
connecting power to the Wine Cooler),
verify the door alignment and proper seal
against the cabinet.
N O T E
Ensure ail screws and fittings are tightly fastened
and that the door is squarely aligned with the cab­
inet before using. Adjust if necessary.
6