Whirlpool 935 Series - Manuel (Page 14)

Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. The dishwasher starts filling once you press a cycle pad unless you
select the delay wash cycle. You may press Option pads as the machine is filling.
CYCLE
A shows what each cycle includes
WASH RINSE
MAIN
WASH RINSE
FINAL
RINSE DRY
CYCLE
TIME
(Minutes)
RINSE/WASH LATER
For rinsing a few items to
be washed one or more
days later.
• Do not use detergent.
• Water is not heated
during RinseA/Vash Later.
• Air Dry is automatically selected.
12
LOW ENERGY/CHINA
Single wash for pre-rinsed
or lightly soiled loads.
• Select High Temp Wash
to heat water in the main
wash. LOW
ENERGY
’ The water heats to 140°F (60°C) in
the final rinse.
60 t
NORMAL
Double wash for normal,
everyday soiled loads.
(The Energy Guide label is
based on this cycle.)
• Select High Temp Wash
to heat water in the main wash.
• The water heats to 140°F (60°C) in
the final rinse.
66t
POTS-N-PANS
Double wash for maximum
cleaning of cooked-on or
dried-on foods.
• The water heats to 140°F
(60°C) in both washes.
The water heats to 140°F (60°C) in
the final rinse.
76+
f Cycle time includes dry time and may be longer depending on the temperature o( water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
14