Installation, Assembly, How to set up your unit – Craftsman 919.72413 Manuel d'utilisation

Page 10

Advertising
background image

10- ENG

A08394

INSTALLATION

HOW TO SET UP YOUR
UNIT

Location of the Air Compressor

Locate the air compressor in a
clean, dry and well ventilated
area.

The air compressor should be
located at least 12" away from
the wall or other obstructions
that will interfere with the flow of
air.

The air compressor pump and
shroud are designed to allow for
proper cooling. The ventilation
openings on the compressor are
necessary to maintain proper
operating temperature. Do not
place rags or other containers on
or near these openings.

GROUNDING INSTRUCTIONS

Risk of Electrical
Shock. In the

event of a short circuit, grounding
reduces the risk of shock by
providing an escape wire for
the electric current. This air
compressor must be properly
grounded.

The portable air compressor is
equipped with a cord having a
grounding wire with an appropriate
grounding plug (see following
illustrations). The plug must be used
with an outlet that has been installed
and grounded in accordance with all
local codes and ordinances.
1. The cord set and plug with this

unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.

IMPORTANT: The outlet being used
must be installed and grounded in
accordance with all local codes and
ordinances.
2. Make sure the outlet being used

has the same configuration
as the grounded plug. DO
NOT USE AN ADAPTER.
See
illustration.

3. Inspect the plug and cord before

each use. Do not use if there are
signs of damage.

4. If these grounding instructions

are not completely understood,
or if in doubt as to whether
the compressor is properly
grounded, have the installation
checked by a qualified
electrician.

Risk of Electrical
Shock. Improper

grounding can result in electrical
shock.

Do not modify the plug provided. If
it does not fit the available outlet,
a correct outlet should be installed
by a qualified electrician.

Repairs to the cord set or plug
MUST be made by a qualified
electrician.

Grounding Pin

Grounded
Outlets

Plug

ASSEMBLY

Unpacking

1. Remove unit from carton and discard all packaging.

Advertising