Starting up/shutting down, If security indicator (g) is displayed, Will not start – Panasonic CF-37 Series Manuel d'utilisation

Page 16: Select your application, Shutting down (power off your computer), Y display the shut down screen, 2 confirm shut down, I restarting your computer (without shutting down)

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

starting Up/Shutting Down

If security indicator (g) is displayed,

you must first enter your password. (O’

"Security Measures")

Upon entering your
password and press­

ing

C Enter).

If the correct password is input.

Over three incorrect attempts,

or no password is entered for about a minute,

Will Not Start*

^^^(Powero^

* If you are starting from the suspend or hibernation mode (C^

"Suspend/Hibcrnation Functions"), if after three attempts the correct pass­
word is not input, or if no password is entered for about a minute, the

computer returns to the suspend or hibernation mode.

When an application or file that was previously displayed
appears on your screen,

the suspend or hibernation function has been set. (C? '^nu!ir "Suspend/Hibernation

Functions")

Select your application

You are able to start working on your computer.

X

n

OT

e

)--------------------------------------------------------------------------------------------- '

> The power Siiving function is factory set, so if there is no input from a key, the touch pad,

or the touchscreen for two minutes. The LCD is powered off (ECO mode).
The LCD will resume operation when the touch pad or the touchscreen is used
or a key is pressed. We recommend using a key that will not result in an input

from the keyboard, such as

(Shift).

t

[System Devices] in [Start] - [Settings] - [Control Panel) - [Systeni[ - [Device

Manager] may contain a device or devices bearing an exclamation mark or ques­
tion mark. This does not indicate a malfunction. Such a mark (exclamation or

question mark) will not be displayed if the operating environment of the device

showing the mark is corrected, by for instance installing the driver of the device.

Shutting Down (power off your computer)

This procedure is shutting down without using the suspend or hibernation function.

(Q>

"Suspend/Hibernation Functions")

y Display the shut down screen

After saving important data and closing each application, select [Shut Down] from
the [Start] menu.

X

>

From the keyboard,

You may choose to press down on

, then select the menu with or

2

Confirm shut down

Select [Shut down], then press [OK]. Your computer will power off automatically.

(In the OFF state, if you are not recharging your battery pack or if the pack is fully charged, your

computer consumes approximately 1,5 W.)

I

Restarting your computer

(without shutting down)

Select [OK] after selecting [Restart],

X

note

>

To quickly resume computer operation after shutting down,

The suspend or hibernation function is available. (O’

"Suspend/Hiber­

nation Functions")

16

Advertising