Panasonic DVD-LA85 - Manuel (Page 37)

Recording to MDs and cassette tapes
C
Analogue recording
]
You can record to an MD or cassette
deck without sound being affected by
copy guards if you use analogue con­
nection.
Digital recording
You can record the digital signal directly
onto an MD. All signals will be converted to
48 kHz linear PCM.
Ensure the following conditions are met.
•There is no copy guard recorded on the
disc.
•The recording equipment can handle a
sampling frequency of 48 kHz/16 bit.
■ To make an analogue recording
1. Connect the recording equipment
with a stereo connection cable
(• pages 34 and 36).
•When connecting directly, use the
same method used for connecting
a 2-channel amplifier or mini­
system (• page 36).
2. Set “7 Speaker Setting” to
“2-channel” page 38).
•If this is set to “Multi-channel”,
only the audio for the front
2 speakers will be recorded.
■ To make a digital recording
1. Connect the recording equipment with
an optical fiber cable pages 35 and
36).
•When connecting directly, use the
same method used for connecting a
2-channel digital amplifier or mini­
system page 36).
2. Change the digital audio output settings
page 40).
Change the settings as follows.
PCM Down Conversion: Yes
Dolby Digital/DTS Digital Surround:
PCM
RQT5602