Disc notes, Handling and cleaning, Only use discs carrying label shown on the right – Panasonic CQ-DFX88EUC Manuel d'utilisation
Page 36: Preparing new discs with rough spots
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Disc Notes
□ Handling and Cleaning
ONLY USE DISCS CARRYING LABEL SHOWN ON THE RIGHT
nCOMRftCT
(
i
]
q
§[§
DIGITAL AUDIO
• Dirt, dust, scratches and warping discs will
cause misoperation.
• Do not place stickers or make scratches on
discs.
• Do not warp discs.
• A disc should always be kept in its case when
not in use to prevent from damaging.
• Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3. Near car heaters.
4. On the seats or dashboard.
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the disc
is quite dirty, use a soft cloth slightly moistured
with isopropyl (rubbing) alcohol. Never use sol
vents such as benzine, thinner or conventional
record cleaners as they may mar the surface of
the disc.
Label side up
Do not bend.
Do not touch
the underside
of the disc.
Wipe the disc from center
toward the outside edge.
□ Preparing New Discs with
Rough Spots
A new disc may have rough edges on its inside
and outside edges. If a disc with rough edges is
used, the proper setting will not be performed
and the CD player will not play the disc.
Therefore, remove the rough edges in advance
by using a bail-point pen or pencil as shown on
the right. To remove the rough edges, press the
side of the pen or pencil against the inside and
outside edges of the disc.
Rough spots on
outside edge
36
CQ-DFX99/DF88EUC