Panasonic CQ-DFX88EUC - Manuel (Page 12)

Radio Basics
(continued)
Press and Hold!
MONO/LOCAL Selection
• At the MONO setting, the amount of interference heard when
weak signals are received from an FM broadcast station is sig­
nificantly decreased.
• At the LOCAL setting, the station search stops automatically as
soon as strong signals are received.
0 FM broadcast
Press and hold [•](MONO/LOC) in the tuner mode for more than 2
seconds to switch between the MONO and LOCAL modes. Each
time [»JiMONO/LOC) is pressed, the display changes as follows.
MONO OFF/LOCAL OFF ^ MONO ON/LOCAL OFF
t i
MONO OFF/LOCAL ON ^ MONO ON/LOCAL ON
(2) AM broadcast
Press and hold [»JiMONO/LOC) for more than 2 seconds to
change the local mode as follows.
LOCAL OFF ^ LOCAL ON
Station Preset
FM1, FM2, FM3 and AM can save a maximum 6 stations each in
their preset station memories.
Manual Station Preset
0 Press [BAND] to select a desired band.
0 Use manual or seek tuning to find a station which is to be pre­
set in the memory.
0 Press and hold one of the preset buttons [1] to [6] for more
than 2 seconds until the display blinks.
CZ ly// ZJ t
f f
i BB. I
IT
Preset number
Note: You can change the memory presetting by repeating
the above procedure.
Tuning in a Preset Station
Press the corresponding preset button [1] to [6] to tune in a preset
station.
Auto Station Preset
Select the band, press and hold [BAND](APM) for more than 2
seconds (Auto Preset Memory).
• The 6 strongest available stations will be automatically saved in
the memory on preset buttons [1] to [6].
• Once set, the preset stations are sequentially scanned for 5
seconds each.
• Press the corresponding preset button for the broadcast you
want to listen to.
12
CQ-DFX99/DF88EUC