Installation procedures, Secure mounting collar 0, Using rear support strap – Panasonic CQ-DFX88EUC Manuel d'utilisation
Page 29: Using the rubber cushion (optional)
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
□ Installation Procedures
Note: Disconnect the cable from the negative (-) battery terminal.
1. Secure Mounting Collar 0.
Insert Mounting Collar © into the dashboard, and bend the mounting tabs out with a screwdriver.
a) Check the electrical connections by referring to this operating instructions. (• Page 33)
b) Connect Mounting Bolt ©, using a suitable wrench.
c) Insert Power Connector (6) to the unit.
d) Insert the unit into the Mounting Collar © and push it in until a “click” is heard.
Power Connector
Unit
(5) Mounting Bolt
Unit
e) Secure the rear of the unit to the car by one of the two recommended methods.
■ Using Rear Support Strap @
Affix one end of Rear Support Strap @ to the rear of the unit, and the other end to the fire wall of the
car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the fire wall of the car.)
Cover the Mounting Bolt © on the rear of the unit with the Rubber Cushion (Optional), and mount it
into the existing Rear Support Bracket.
Fire wall of the car
Rear Support Bracket
29