System connections, Single monitor connection 3. audio circuit signal, Multiple monitor connection – Panasonic WV-CM1430 Manuel d'utilisation
Page 7
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
SYSTEM CONNECTIONS
1. Single monitor Connection
3. Audio circuit signal
Camera
VCRA^ideo Disc Player
• Connect the Video Output terminal of the camera or
VCR to the Video Input Connector of the monitor
with 75 ii coaxial cable.
2. Multiple Monitor Connection
Camera
Coax,
Cable
VIDEO
OUT
Coax.
Cable
Connect the Video Out Terminal of VCR or camera
to the Video Input Connector of this monitor with
75 O coaxial cable.
Connect the Audio Out Terminal of VCR to the Audio
Input Connector of this monitor and connect the
Audio Input Terminal of the audio amplifier to the
Audio Output Connector of this monitor with a audio
cable.
"JT3"
O
Connect the Video Output terminal of the camera or
VCR to the Video Input Connector of the video moni
tor with 75 Q coaxial cable.
Connect the Video Output Connector on the first
monitor to the Video Input Connector on the second
monitor with 75
0.
coaxial cable, and continue until
all monitors are connected.
Note:
Properly check the connections in the input
and output, because the monitor will not be
properly terminated if the connections are
wrong.
-
5
-