Panasonic WV-CM1430 - Manuel (Page 5)

1. Power Switch (POWER)
This is a push-push type switch which turns the
power of the monitor on and off.
Press once and the switch remains down (_«_) for
turning on the power of monitor.
Press again, the switch comes up (J_) for turning
off the power of the monitor.
2 . Power Indicator
This indicator lights up when the monitor is turned
on.
3. Input Selection Switch (INPUT SELECT A/B)
This is a push-push type switch which selects the
signal input to A or B.
Press once and the switch remains down (^) for
selecting the INPUT B signal.
Press again, the switch comes up (_l) for selecting
the INPUT A signal.
4. Vertical Hold Control (V-HOLD)
This control is used to adjust the picture in vertically.
5. Tint Control (TINT)
Turn this control clockwise for purplish color of the
picture.
Turn this control counterclockwise for greenish color
of the picture.
6. Tint Sub Control
7. Color Control (COLOR)
Turn this control clockwise to increase the picture's
color and turn this control counterclockwise to
decrease the picture’s color.
8. Color Subcontrol
This control is preset at the factory.
9. Bright Control (BRIGHT)
Turn this control clockwise to increase the picture's
brightness and turn this control counterclockwise to
decrease the picture's brightness.
10. Bright Subcontrol
This control is preset at the factory.
11. Contrast Control (CONTRAST)
Turn this control clockwise to increase the picture’s
contrast and turn this control counterclockwise to
decrease the picture's contrast.
12. Contrast Subcontrol
This control is preset at the factory.
13. Picture Adjustment (PICTURE)
Turn this control clockwise for sharp picture and
turn this control counterclockwise for soft picture.
14. Audio Voiume (AUDiO)
Turn this volume clockwise to increase the audio
level and turn this volume counterclockwise to
decrease the audio level.
15. Focus Control (FOCUS)
This control is preset at the factory.
16. Screen Control
This control is preset at the factory. Do not adjust
this control. When the adjustment of this control is
required, refer to the qualified service personal.
17. Video Input Connector (INPUT B - VIDEO IN)
This input accepts a composite NTSC video signal
with 750 auto termination.
18. Video Output Connector (INPUT B - VIDEO OUT)
The video input signal connected to the Video Input
Connector is looped through to this connector.
This connector becomes unterminated by connect­
ing a coaxial cable to it.
19. Audio Input Connector (INPUT B - AUDIO IN)
-8dB/Hi-Z audio signal can be supplied to this input
connector.
20. Audio Output Connector (INPUT B - AUDIO OUT)
The audio input signal connected to the Audio Input
Connector is looped through to this connector.
21. Video Input Connector (INPUT A - VIDEO IN)
This input accepts a composite NTSC video signal
with 750 auto termination.
22. Video Output Connector (INPUT A - VIDEO OUT)
The video input signal connected to the Video Input
Connector is looped through to this connector.
This connector becomes unterminated by connect­
ing a coaxial cable to it.
23. Audio Input Connector (INPUT A - AUDIO IN)
-8dB/Hi-Z audio signal can be supplied to this input
connector.
24. Audio Output Connector (INPUT A - AUDIO OUT)
The audio input signal connected to the Audio Input
Connector is looped through to this connector.
25. Power Cord
-
3
-