Voltage Valet TJ500U - Manuel

V
OLTAGE
V
ALET ™
North America To Japan
UL Listed Step Up Transformer
Model TJ500U
500 Watt Maximum Load Input 100VAC 50/60 Hz 0utput 120VAC 50/60 Hz
Instruction Manual
Read instructions before using this appliance
Voltage Valet
North America To Japan
TJ500U
The Voltage Valet North America to Japan step up transformer
allows 120 volt North American appliances to operate on 100 volt
Japanese power sources. Designed for use with 120 volt North
American motorized, electronic, or heating appliances rated up to
500 watts, including: Battery Chargers, Camcorders, Digital
Cameras, Notebook Computers, Desktop Computers, Printers,
Televisions, Food Processors, CD/Mini Disk Players, Stereos,
Electric Shavers, Hot Rollers, Curling Irons, Oral Hygiene Devices.
IMPORTANT SAFEGUARDS
When using electrical appliances, especially when children are present,
certain basic safety precautions should always be followed, including:
Read all instructions before using.
DANGER —As with most electrical appliances, electrical parts
are electrically live even when the switch is off. To reduce the risk
of injury or death by electric shock:
1. KEEP THIS APPLIANCE AWAY FROM WATER.
2. Do not immerse the transformers in water or other liquid.
3. Do not use while bathing.
4. Do not place or store appliance where it can fall or be pulled
into bathtub or sink. If the appliance falls into water, UNPLUG
IT IMMEDIATELY. DO NOT REACH INTO THE WATER TO
RETRIEVE IT WHILE IT IS STILL PLUGGED IN. DO NOT USE
THE UNIT IF IT HAS BEEN IMMERSED IN WATER.
5. Always unplug this appliance immediately after use.
WARNING —To reduce the risk of burns, electrocution, fire,
or injury:
1. Do not leave unattended when connected to electrical outlet.
2. Always disconnect the transformer from the electrical outlet
immediately after use or before cleaning. Never yank the
cord to disconnect from outlet; instead, grasp plug and pull
to disconnect.
3. Close supervision is necessary when any appliance is used
by or near children or invalids.
4. Use the transformer for its intended use only as described
in this manual. Never use any attachments with this unit
that were not made specifically by Voltage Valet for use
with this product.
5. Never operate appliance with a damaged cord or plug, or
if the unit has been dropped or damaged. To avoid the risk
of electrical shock, do not disassemble the transformers.
No user-serviceable parts are contained. Instead, return the
unit to Voltage Valet for examination and repair. Incorrect
reassembly can cause risk of electric shock when the
transformer is used.
6. Do not allow cord to touch hot surfaces. Let transformers
cool completely before putting away.
7. Burns can occur while touching hot parts.
8. Never drop or insert any other object into the transformers
or any other openings.
One Year Warranty
We guarantee each new transformer to be free from
defects in material or workmanship and to perform under
normal use and service. This guarantee shall run for a
period of one year from the date of purchase and obliga-
tions under this guarantee are limited to remedying any
defect or replacing any defective part and shall be effec-
tive only if the defective unit is returned to us within 12
months after purchase. Damage due to abuse, misuse or
overloading is not covered by this guarantee. We shall not
be responsible for any other loss or damage that may
arise through the use by a purchaser or others of this
device and the purchaser assumes such responsibility
and will hold Hybrinetics, Inc. harmless in respect to all
such loss or damage.
Important: This is a factory direct warranty. Do not
return defectives to your retailer. All defectives must be
returned to the factory accompanied by a sales receipt
with the original date of purchase. For more informa-
tion please call our toll free number (800) 247-6900.
Voltage Valet Division, Hybrinetics, Inc.
225 Sutton Place, Santa Rosa CA 95407
© 1999 HYBRINETICS, INC.
9. Do not use outdoors or operate where aerosol products
are being used, where oxygen is being administered,
or in the presence of explosive and/or flammable fumes.
10. This appliance is intended for household and travel use
only; it is not intended for commercial or industrial use.
11. This appliance is intended for use with alternating current
(A.C.). Never plug the unit into a direct current (D.C.) outlet.
SAVE THESE INSTRUCTIONS
Special Instructions
Input Power Source
1. Caution—Use only with 100 VAC Japanese power sources.
Ground Connection:
Important: Many Japanese electrical outlets do not have
grounded receptacles. To make a ground connection:
1. Turn power off to the receptacle at the fuse box or
circuit breaker.
2. Remove receptacle cover plate metal screw (do not remove
cover plate).
3. Place metal screw through ground wire connector and
cover plate and tighten screw.
4. Turn on power to receptacle.
Transformer Overload
Voltage Valet Step Up Transformers are equipped with
a replaceable fuse to protect your appliance and the transformer.
To replace the fuse:
1. Switch the ON/OFF switch to the “OFF” position and unplug
the power cord.
2. Unscrew the cap on the fuse holder.
3. Remove the opened fuse and replace with a new fuse of the
same rating (see chart). Replace the fuse holder cap.
Model TJ500U
Maximum Load: 500 Watts
Fuse Rating: 6.3 Amp 250 VAC
Fuse Size: 5mm X 20mm
Fuse Type: Time Delay (SLOW BLOW)
To Move Transformer
1. Be sure the ON/OFF switch is in the “OFF” position and the
power cord is disconnected. Allow transformer to cool.
2. Transformers are heavy. Use caution when moving.
Be sure you have a secure grip on the transformer case.
OPERATING INSTRUCTIONS
1. Place the transformer on a firm, flat surface.
2. Be sure the ON/OFF power switch is in the “OFF” position.
Plug the power cord into a 100 VAC Japanese power source.
3. Be sure your 120 VAC appliance ON/OFF switch is in the
“OFF” position prior to use.
4. Plug your 120 VAC appliance into the receptacle. See Fig. 1.
Be sure the appliance plug is fully inserted into the receptacle.
5. Turn the transformer ON/OFF power switch to the “ON”
position. You are now ready to turn the appliance switch on
and operate your 120 VAC appliance.
MAINTENANCE AND CLEANING
DO NOT IMMERSE THE TRANSFORMERS IN WATER
OR ANY OTHER LIQUID.
1. Before cleaning, disconnect the transformer from
the electrical outlet. Allow to cool completely.
2. Clean transformers by wiping with a soft damp
cloth. Do not use abrasive or harsh cleaning agents.
No other maintenance is required.
3. Store transformer where it will not be damaged.
Do not wrap cord around transformer.
4. Do not attempt to repair the transformer yourself.
Return to Voltage Valet for service.
Figure 1