Voltage Valet TJ500D - Manuel

SAVE THESE INSTRUCTIONS
Special Instructions
Input Power Source
1. Caution—Use only with 120 VAC North American power sources.
2. Earthing—The output receptacle, transformer case, and power
case are grounded. Do not defeat the grounding system.
Transformer Overload
Voltage Valet Step Down Transformers are equipped with a
replaceable fuse to protect your appliance and the transformer.
To replace the fuse:
1. Switch the ON/OFF switch to the “OFF” position and unplug
the power cord.
2. Unscrew the cap on the fuse holder.
3. Remove the opened fuse and replace with a new fuse of the
same rating (see chart). Replace the fuse holder cap.
Model TJ500D
Maximum Load: 500 Watts
Fuse Rating: 5 Amp 250 VAC
Fuse Size: 5mm X 20mm
Fuse Type: Time Delay (SLOW BLOW)
To Move Transformer
1. Be sure the ON/OFF switch is in the “OFF” position and
the power cord is disconnected. Allow transformer to cool.
2. Transformers are heavy. Use caution when moving.
Be sure you have a secure grip on the transformer case.
OPERATING INSTRUCTIONS
Figure 1
V
OLTAGE
V
ALET ™
Japan To North America
UL Listed Step Down Transformer
Model TJ500D
500 Watt Maximum Load Input 120VAC 60 Hz 0utput 100VAC 60 Hz
Instruction Manual
Read instructions before using this appliance
9. Do not use outdoors or operate where aerosol products
are being used, where oxygen is being administered,
or in the presence of explosive and/or flammable fumes.
10. This appliance is intended for household and travel use
only; it is not intended for commercial or industrial use.
11. This appliance is intended for use with alternating current
(A.C.). Never plug the unit into a direct current (D.C.) outlet.
Voltage Valet
Japan To North America
TJ500D
The Voltage Valet Japan to North America step down transformer
allows 100 volt Japanese appliances to operate on 120 volt North
American power sources. Designed for use with 100 volt Japanese
motorized, electronic, or heating appliances rated up to 500 watts,
including: Battery Chargers, Camcorders, Digital Cameras,
Notebook Computers, Desktop Computers, Printers, Televisions,
Food Processors, CD/Mini Disk Players, Stereos, Electric Shavers,
Hot Rollers, Curling Irons, Oral Hygiene Devices.
IMPORTANT SAFEGUARDS
When using electrical appliances, especially when children are present,
certain basic safety precautions should always be followed, including:
Read all instructions before using.
DANGER —As with most electrical appliances, electrical parts
are electrically live even when the switch is off. To reduce the risk
of injury or death by electric shock:
1. KEEP THIS APPLIANCE AWAY FROM WATER.
2. Do not immerse the transformers in water or other liquid.
3. Do not use while bathing.
4. Do not place or store appliance where it can fall or be pulled
into bathtub or sink. If the appliance falls into water, UNPLUG
IT IMMEDIATELY. DO NOT REACH INTO THE WATER TO
RETRIEVE IT WHILE IT IS STILL PLUGGED IN. DO NOT USE
THE UNIT IF IT HAS BEEN IMMERSED IN WATER.
5. Always unplug this appliance immediately after use.
WARNING
—To reduce the risk of burns, electrocution, fire,
or injury:
1. Do not leave unattended when connected to electrical outlet.
2. Always disconnect the transformer from the electrical outlet
immediately after use or before cleaning. Never yank the
cord to disconnect from outlet; instead, grasp plug and pull
to disconnect.
3. Close supervision is necessary when any appliance is used
by or near children or invalids.
4. Use the transformer for its intended use only as described
in this manual. Never use any attachments with this unit
that were not made specifically by Voltage Valet for use
with this product.
5. Never operate appliance with a damaged cord or plug, or
if the unit has been dropped or damaged. To avoid the risk
of electrical shock, do not disassemble the transformers.
No user-serviceable parts are contained. Instead, return the
unit to Voltage Valet for examination and repair. Incorrect
reassembly can cause risk of electric shock when the
transformer is used.
6. Do not allow cord to touch hot surfaces. Let transformers
cool completely before putting away.
7. Burns can occur while touching hot parts.
8. Never drop or insert any other object into the transformers
or any other openings.
One Year Warranty
We guarantee each new transformer to be free from
defects in material or workmanship and to perform under
normal use and service. This guarantee shall run for a
period of one year from the date of purchase and obliga-
tions under this guarantee are limited to remedying any
defect or replacing any defective part and shall be effec-
tive only if the defective unit is returned to us within 12
months after purchase. Damage due to abuse, misuse or
overloading is not covered by this guarantee. We shall not
be responsible for any other loss or damage that may
arise through the use by a purchaser or others of this
device and the purchaser assumes such responsibility
and will hold Hybrinetics, Inc. harmless in respect to all
such loss or damage.
Important: This is a factory direct warranty. Do not
return defectives to your retailer. All defectives must be
returned to the factory accompanied by a sales receipt
with the original date of purchase. For more informa-
tion please call our toll free number (800) 247-6900.
Voltage Valet Division, Hybrinetics, Inc.
225 Sutton Place, Santa Rosa CA 95407
© 1999 HYBRINETICS, INC.
1. Place the transformer on a firm, flat surface.
2. Be sure the ON/OFF power switch is in the “OFF” position.
Plug the power cord into a 120 VAC power source.
3. Be sure your 100 VAC Japanese appliance ON/OFF switch
is in the “OFF” position prior to use.
4. Plug your 100 VAC Japanese appliance into the receptacle.
See Fig. 1. Be sure the appliance plug is fully inserted into
the receptacle.
5. Turn the transformer ON/OFF power switch to the “ON”
position. You are now ready to turn the appliance switch
on and operate your 100 VAC Japanese appliance.
MAINTENANCE AND CLEANING
DO NOT IMMERSE THE TRANSFORMERS IN WATER
OR ANY OTHER LIQUID.
1. Before cleaning, disconnect the transformer from
the electrical outlet. Allow to cool completely.
2. Clean transformers by wiping with a soft damp cloth.
Do not use abrasive or harsh cleaning agents.
No other maintenance is required.
3. Store transformer where it will not be damaged.
Do not wrap cord around transformer.
4. Do not attempt to repair the transformer yourself.
Return to Voltage Valet for service.