Technical description, Instructions – Krampouz Waffle maker UL Manuel d'utilisation

Page 15

Advertising
background image

- 15 -

§

Do not put the appliance nor its cable on or near a hot surface (electric hotplate, hot gas burner,

heated oven etc).

§

Disconnect the plug when the appliance is not in use or before cleaning.

§

The appliance must not be cleaned with a high or low pressure jet.

§

Do not bleach.

§

Do not handle the appliance while hot.

§

Do not touch the hot surfaces.

§

Leave the appliance to cool prior to handling or cleaning it.

§

Do not use this appliance outdoors in damp weather.

§

Place the appliance on a dry and stable surface at least 20 cm from any wall or element liable to be
affected by heat, and slightly back from the edge.

§

Take care: Do not insert a sheet of tin foil or any other material or object (risk of damage) between
the plate and the frame (ventilation area).

§

Do not block the ventilation holes of the plastic base, under the frame (risk of damage).

§

We recommend you keep the original packaging in order to store the appliance.

KEEP THESE INSTRUCTIONS

Technical description

"Heating element pack" electric waffle irons are easy and comfortable to use thanks to their thermostat
adjustable to temperatures up to 300°C. They are fitted with cast-iron plates called irons. These contain
shielded heating elements which spread the heat evenly so that perfectly cooked waffles can be obtained.

§

Stainless steel frame

§

Irons made of cast-iron certified for use with foodstuffs

§

Removable drip trays

§

Thermostat with knob adjustable from 50 to 300°C

§

Heating indicator

§

On/Off switch

§

Indicator light

§

Single phase 120 V or 240 Volt power supply

Instructions

Work surface

Choose an easy-to-clean work surface on which to install the appliance. The appliance must be at least
20 cm from any vertical surfaces that are not heat-resistant. To ensure maximum ease of use, the top of the
irons should be between 85 and 95 cm from the ground.

Electrical connection

The appliances must be connected to the single phase 120 V or 240 V. See the table page 2 for the
voltage, power and type of outlet. They are delivered with a power cable, type SJTOW 3 conductors
(phase + neutral + earth), cross-section 14 AWG.

Advertising